Equipment condition
Heat damage, corrosion, loose connections, incompatible components, and physical condition matter more than appearance alone.
Panel replacement and service upgrades
Electrical Panel Upgrades in Palatine, IL
Electrical panel replacement, 100-to-200-amp service upgrades, subpanels, breaker organization, and capacity planning near Palatine.
Licensed #23-00027745
4.8 · 50 reviews
AGE / PANEL UPGRADESPalatine + ~15 miles
Panel Upgrades estimate near Palatine
Request a Panel Upgrades Estimate
Send your contact details, the property ZIP code, and the service you need. We’ll follow up to discuss the property, equipment, and next step.
Capacity and installation planning
Is the Panel Damaged, Crowded, or Undersized?
A replacement panel can address damaged or obsolete equipment and improve circuit organization. A service upgrade changes the capacity supplied to the property and may involve the meter, service conductors, utility coordination, grounding, permits, and inspections.
AGE Electric reviews the equipment condition, existing and planned loads, available breaker positions, service rating, and project goals before recommending a panel, subpanel, or service solution.
Three checks before installation
Present and future load
EV charging, electric appliances, HVAC, additions, workshops, and tenant equipment can all influence capacity planning.
Utility and permit path
Service work may require advance coordination, approved equipment locations, inspections, and a planned outage window.
Installation scope
Panel replacement and service capacity are related—but not identical
AGE Electric evaluates and replaces aging, damaged, crowded, or undersized electrical panels for Palatine-area homes and businesses. Panel and service upgrades may support additions, EV chargers, HVAC equipment, major appliances, new circuits, or the replacement of outdated service equipment.
Panel replacement and modernization
100-to-200-amp service upgrades
Breaker and bus evaluation
Circuit directory cleanup and labeling
Grounding and bonding corrections
Subpanel installation
Capacity planning for EVs and appliances
Coordination with utility and inspections as required
Panel, route, equipment, and final testInstallation path1 2 3 4
How the Scope Is Verified
Inspect service and planned loads
Define equipment and coordination needs
Complete upgrade and reconnect circuits
Test, label, and review the new panel
Common project situations
Older or crowded panels
Frequent breaker trips
Major remodels and additions
EV chargers and new high-load equipment
Palatine planning built into this page
What can this project cost and how long can it take?
Comparable northwest-suburban planning bands are about $2,000–$6,000 for a subpanel, $3,500–$8,500+ for a panel replacement, and $5,500–$12,000+ for a broader service revision. The quote must say whether it adds circuit space, replaces distribution equipment, or actually changes utility-service capacity.
Straightforward panel replacement field work may fit in one scheduled workday, but the controlled outage is only one part of the timeline. Permit review, equipment availability, utility coordination, service conductors, meter work, relocation, grounding corrections, and inspections can extend the calendar schedule or require additional workdays.
Planning ranges—not quotes
The property, equipment, access, existing conditions, permit, utility, and restoration scope determine AGE Electric’s quote.
Palatine project factors
What changes the local scope
Palatine properties range from established homes and condos to active commercial corridors. A useful panel proposal separates damaged or crowded equipment, added circuit positions, service capacity, and the new loads the property is actually planning.
Service revision paperwork
Meter, service conductors, disconnects, and ComEd coordination are different from a panel-only replacement.
Occupied-property outage
The proposal should identify what loses power, the expected controlled outage, and what happens if corrections are found.
Future-load list
EV charging, induction cooking, HVAC, additions, and workshops belong in the load discussion.
Municipal source
Permit and inspection planning for Palatine
Palatine publishes its permit and inspection process online, including separate service-revision guidance. Confirm the current submittal, contractor, ComEd, and inspection steps before fixing an installation or shutdown date.
Village of Palatine Building Permits & Inspections2026 planning bands
Compare the same scope—not just totals
Each range carries assumptions about equipment, routing, permits, restoration, and enabling work.
| Comparable scope | Planning range | What it assumes | What can change it |
|---|---|---|---|
| Subpanel installation | $2,000–$6,000 | Additional distribution with adequate upstream service and a defined feeder route | A subpanel creates circuit space; it does not automatically increase service capacity |
| Panel replacement | $3,500–$8,500+ | Comparable equipment replacement, circuit transfer, labeling, grounding review, permit, and testing | Meter, service lateral, relocation, exterior restoration, and utility work may be separate |
| Broader service revision | $5,500–$12,000+ | Service equipment, conductors, meter, exterior routing, or substantial corrections | Utility requirements, underground work, property conditions, and restoration materially change cost |
Estimate comparison checklist
What the written scope should identify
Use this list to expose missing assumptions before the project starts.
- Existing and proposed equipment ratings
- Panel, subpanel, meter, disconnect, feeder, and grounding scope
- Circuit transfers, corrections, surge protection, labeling, and testing
- Permit, inspection, utility, and shutdown responsibilities
- Wall, siding, masonry, trench, landscaping, and finish-restoration exclusions
Is a Palatine panel replacement the same as a 200-amp upgrade?
No. Replacing distribution equipment does not prove the utility service increased. The estimate should state existing and proposed ratings and name any meter, conductor, disconnect, grounding, and utility work.
Specific services
Choose the Page That Matches Your Project
Find the installation or repair you need below, along with what to share for an estimate and related options. For a project with several types of work, use the broader service page.
Evidence for this service
Real work, useful ranges, and visible limits
See the documented city and work in each project record. Use the planning guides to understand costs for comparable work; those ranges are not customer invoices or quotes.
Electrical Panel & Service Upgrades FAQs
Panel Upgrades Questions, Answered
These answers cover common questions about electrical panel & service upgrades. The property and equipment determine the final scope.
All electrical FAQsDoes a tripping breaker mean I need a new panel?
Not automatically. Tripping can point to overload, a circuit fault, equipment trouble, or a breaker issue. Diagnosis should come before replacement.
How long is power typically off?
Downtime depends on the scope and required coordination. The expected shutoff window is discussed before the project is scheduled.
Can you add a subpanel instead?
Sometimes. A subpanel adds distribution space but does not create utility-service capacity. The existing service and total load must still support it.
Is 200-amp service always necessary?
No. The appropriate capacity depends on the calculated load, existing service, planned equipment, and property needs. A larger number is not a substitute for evaluation.
Does a panel upgrade require a permit and inspection?
Panel and service work commonly requires municipal permits and inspection. Service changes may also require utility coordination before and after the installation.
Customer experience
4.8
★★★★★50 current Google reviews
What Customers Say About Working With AGE Electric
Project details vary, but customers consistently describe the communication, workmanship, cleanup, and problem-solving that matter on electrical work.